Environmental Ergonomics: Evaluation and Improvement Plan for Lighting Conditions in a Workplace using Lean Tools

Autores

DOI:

https://doi.org/10.61616/rvdc.v6i2.706

Palavras-chave:

lighting, NOM, ergonomics, continuous improvement

Resumo

A detailed analysis of ergonomic conditions in the workplace is focused on this research, with particular attention on lighting conditions. The direct impact of proper lighting on employee health, safety, and performance is where the importance of this research relies. To ensure fairness and compliance with standards, NOM-025-STPS-2008: Lighting Conditions in Workplaces, a crucial regulation in Mexico that defines the minimum lighting requirements to ensure a safe and pleasant work environment. The establishment of the lighting level in different areas of the organization was aimed at, thereby allowing for the detection of potential failures that could adversely affect staff performance and well-being. The methodology used was organized into two fundamental stages. During the first stage, a detailed initial analysis of the current lighting conditions was conducted. Based on the findings of this diagnosis, a comprehensive improvement plan was developed and implemented. In the second stage, after the corrective actions were implemented, a new assessment of the lighting conditions was conducted. The effectiveness of the implemented actions was evaluated, and the impact of the improvements was quantified by this review. The PDCA (Plan, Do, Check, Act) continuous improvement cycle was used for the development of the entire process, which facilitated not only the solutions' implementation but also the ongoing supervision and monitoring of actions, thus ensuring that an ideal work environment that complies with ergonomic and occupational safety standards was achieved.

Referências

Ab Rahman, M. N., Khamis, N. K., Zain, R. M., Deros, B. M., & Mahmood, W. H. W. (2010). Implementation of 5S practices in the manufacturing companies: A case study. American Journal of Applied Sciences, 7(8), 1182-1189.

Aguilar Carrasco, J. I., Cuevas Torres, O. M., & García López, I. F. (2023). Desarrollo de una aplicación móvil tipo luxómetro considerando los niveles mínimos de iluminación establecidos en la Norma Oficial Mexicana 025 STPS 2008. Transdigital, 4(7), 1–23.

https://doi.org/10.56162/transdigital183

Alarcón, R. Z., Peñuelas, C. A. C., Lara, J. R. V., Barraza, A. C., & Zepeda, A. S. O. (2024). Mejora ergonómica y productiva en prensa CNC en empresa manufacturera. CULCyT: Cultura Científica y Tecnológica, 21(1), 1.

Andrejiová, M.; Pi ˇnosová, M.; Králiková, R.; Dolník, B.; Liptai, P.; Dolníková, E. Analysis of the Impact of Selected Physical Environmental Factors on the Health of Employees: Creating a Classification Model Using a Decision Tree. Int. J. Environ. Res. Public Health 2019, 16, 5080. https://doi.org/10.3390/ijerph16245080

Ayala, J. R. (2024). La importancia de la iluminación en la educación superior. Know and Share Psychology, 5(1), 7-20. https://doi.org/10.25115/kasp.v5i1.9384

Baloch, R.M.; Maesano, C.N.; Christoffersen, J.; Mandin, C.; Csobod, E.; de Oliveira Fernandes, E.; Annesi-Maesano, I.; On Behalf of the SINPHONIE Consortium. Daylight and School Performance in European Schoolchildren. Int. J. Environ. Res. Public Health 2021, 18, 258. https://doi.org/10.3390/ijerph18010258

Bataineh, O., Al-Hawari, T., Alshraideh, H., & Dalalah, D. (2019). A sequential TPM-based scheme for improving production effectiveness presented with a case study. Journal of Quality in Maintenance Engineering, 25(1), 144-161.

Rodríguez Bustos, N. E. (2024). Impacto del diseño de iluminación de una Cabina ergonómica: Un estudio evaluativo con la NOM 025-STPS-2008: Ergonomía. Investigación Y Ciencia Aplicada a La Ingeniería, 7(45). Recuperado a partir de

https://www.ojsincaing.com.mx/index.php/ediciones/article/view/401

Díaz-López, C., Serrano-Jiménez, A., Verichev, K., & Barrios-Padura, Á. (2022). Passive cooling strategies to optimise sustainability and environmental ergonomics in Mediterranean schools based on a critical review. Building and Environment, 221, 109297.

https://doi.org/10.1016/j.buildenv.2022.109297

Murillo Zavala, A. M., Chica Bravo, G. M., Franco Alvarado, I. E., & Vélez Castro, J. B. (2025). Marcadores tempranos en el diagnóstico de la enfermedad renal crónica en pacientes diabéticos e hipertensos: Revisión bibliográfica. Arandu UTIC, 12(1), 4465–4479. https://doi.org/10.69639/arandu.v12i1.905

Colmán López, M. C. (2025). La inteligencia artificial en la creación artística: Análisis de su influencia en la producción cultural. I+D Internacional Revista Científica Y Académica , 4(1), 43–64. https://doi.org/10.63636/3078-1639.v4.n1.26

Fernández Sánchez , D. (2025). Implementación de Algoritmos de Machine Learning para la Detección Temprana de Fraude en Transacciones Electrónicas. Ciencia Y Reflexión, 4(1), 2652–2667. https://doi.org/10.70747/cr.v4i1.285

Valdivieso Rezabala, R. S. (2025). Evaluación del Aprovechamiento de los Productos Forestales no Maderables en Tres Recintos de la Parroquia Campozano, Cantón Paján, Manabí, Ecuador. Ciencia Latina Revista Científica Multidisciplinar, 9(2), 7941-7959. https://doi.org/10.37811/cl_rcm.v9i2.17513

Pérez Gallegos , S. J., & Domínguez Marín, M. J. (2025). La Importancia de Contar con un Perfil Competitivo en Psicólogos que Atienden a Estudiantes Universitarios. Estudios Y Perspectivas Revista Científica Y Académica , 5(2), 881–895. https://doi.org/10.61384/r.c.a.v5i2.1166

Jiménez Gómez, R. (2025). Análisis de la Heterogeneidad Estructural de las Regiones de Costa Rica. Ciencia Y Reflexión, 4(2), 37–66. https://doi.org/10.70747/cr.v4i2.244

Domínguez-Alfaro, D., Mendoza-Muñoz, I., Montoya-Reyes, M. I., Vargas-Bernal, O. Y., & Jacobo-Galicia, G. (2023). Design and implementation of integral ergo-value stream mapping in a metal-mechanical company to improve ergonomic and productive conditions: A case study. Logistics, 7(4), 100. https://doi.org/10.3390/logistics7040100

Gligor, V. Luminous Environment and Productivity at Workplaces. Ph.D. Thesis, Helsinki University of Technology, Espoo, Finland, 2004.

Guzmán Mondragón, L. M., Jardinez García, A. E., Morales Cruz , E. U., Arroyo Barranco, C., & Toache Pérez, A. D. (2025). Plan de Mejora del Entorno Psicosocial de un Taller Automotriz con Base en la NOM-035-STPS-2018. Ciencia Y Reflexión, 4(2), 588–618.

https://doi.org/10.70747/cr.v4i2.267

Hendrick, H. W., & Kleiner, B. M. (2001). Macroergonomics: An introduction to work system design. (No Title).

Juslén, H.; Tenner, A. Mechanisms involved in enhancing human performance by changing the lighting in the industrial workplace. Int. J. Ind. Ergon. 2005, 35, 843–855.

https://doi.org/10.1016/j.ergon.2005.03.002

Králiková, R.; Lumnitzer, E.; Džu ˇnová, L.; Yehorova, A. Analysis of the Impact of Working Environment Factors on Employee’s Health and Wellbeing; Workplace Lighting Design Evaluation and Improvement. Sustainability 2021, 13, 8816.

https://doi.org/10.3390/su13168816.

McKee, C., & Hedge, A. (2022). Ergonomic lighting considerations for the home office workplace. Work, 71(2), 335-343.

Morales Cruz, E. U., Pérez Castelán, M., Ramírez Quintanilla, L., & Ramírez Reyna, S. B. (2025). Implementación de indicadores de la manufactura esbelta: eficiencia global de los equipos y las seis grandes pérdidas del mantenimiento en la empresa Pack-Isi. Ingeniería Industrial, (48), 163-189.

https://doi.org/10.26439/ing.ind2025.n48.7750

Rodríguez, H. G. (2017). Rediseño de una estación de trabajo considerando la ergonomía para incrementar la productividad.

Sunde, E.; Pedersen, T.; Mrdalj, J.; Thun, E.; Grønli, J.; Harris, A.; Bjorvatn, B.; Waage, S.; Skene, D.J.; Pallesen, S. Alerting and Circadian Effects of Short-Wavelength vs. Long-Wavelength Narrow-Bandwidth Light during a Simulated Night Shift. Clocks Sleep 2020, 2, 502–522. https://doi.org/10.3390/clockssleep2040037

Valencia Salinas, Á. M. (2023). Diseño lumínico en las áreas de producción de la empresa Ecuatran SA del cantón Ambato, provincia Tungurahua, Ecuador.

Valencia, L. E. C., Jaime, C. L. R., & Guzmán, E. M. A. (2021). Análisis de las condiciones de iluminación en las aulas del Departamento de Ingeniería Civil de la Universidad de Guanajuato de acuerdo con la NOM-025-STPS-2008 y NOM-007-ENER-2014. Ciencia Nicolaita, (82).

Velazquez-Lucho, K. M., & Venegas-Sánchez, J. A. (2022). Estudio energético y redistribución de luminarias conforme a la NOM-025-STPS-2008 y NOM-007-ENER-2014. Tendencias En energías Renovables Y Sustentabilidad, 1(1), 170–180.

https://doi.org/10.56845/terys.v1i1.168

Downloads

Publicado

2025-07-22

Como Citar

Barrera Añas, J. A., Sánchez Martínez, A. G., Morales Cruz, E. U., Rivera Anaya , M., & Escamilla Anaya, E. (2025). Environmental Ergonomics: Evaluation and Improvement Plan for Lighting Conditions in a Workplace using Lean Tools . Revista Veritas De Difusão Científica, 6(2), 1568–1592. https://doi.org/10.61616/rvdc.v6i2.706

Edição

Seção

Artigos